Online Customer Service
Monday - Sunday: 6:00 - 18:00 (PST/PDT)
DJI Store APP
Manage your devices in one place. Conveniently request services.
Check It OutNeed assistance? We’re here to help!
Specs
Phantom 4 Pro V2.0
Aircraft
Weight (Battery & Propellers Included)1375 g
Diagonal Size (Propellers Excluded)350 mm
Max Ascent SpeedS-mode: 6 m/s
P-mode: 5 m/s
P-mode: 5 m/s
Max Descent SpeedS-mode: 4 m/s
P-mode: 3 m/s
P-mode: 3 m/s
Max SpeedS-mode: 45 mph (72 kph)
A-mode: 36 mph (58 kph)
P-mode: 31 mph (50 kph)
A-mode: 36 mph (58 kph)
P-mode: 31 mph (50 kph)
Max Pitch AngleS-mode: 42°
A-mode: 35°
P-mode: 25°
A-mode: 35°
P-mode: 25°
Max Angular SpeedS-mode: 250°/s
A-mode: 150°/s
A-mode: 150°/s
Max Service Ceiling Above Sea Level19685 ft (6000 m)
Max Wind Speed Resistance10 m/s
Max Flight TimeApprox. 30 minutes
Operating Temperature Range32° to 104°F (0° to 40°C)
Satellite Positioning SystemsGPS/GLONASS
Hover Accuracy RangeVertical:
±0.1 m (with Vision Positioning)
±0.5 m (with GPS Positioning)
Horizontal:
±0.3 m (with Vision Positioning)
±1.5 m (with GPS Positioning)
±0.1 m (with Vision Positioning)
±0.5 m (with GPS Positioning)
Horizontal:
±0.3 m (with Vision Positioning)
±1.5 m (with GPS Positioning)
Gimbal
Stabilization3-axis (pitch, roll, yaw)
Controllable RangePitch: -90° to +30°
Max Controllable Angular SpeedPitch: 90°/s
Angular Vibration Range±0.02°
Vision System
Vision SystemForward Vision System
Backward Vision System
Downward Vision System
Backward Vision System
Downward Vision System
Velocity Range≤31 mph (50 kph) at 6.6 ft (2 m) above ground
Altitude Range0-33 ft (0-10 m)
Operating Range0-33 ft (0-10 m)
Obstacle Sensory Range2-98 ft (0.7-30 m)
FOVForward: 60° (Horizontal), ±27° (Vertical)
Backward: 60° (Horizontal), ±27° (Vertical)
Downward: 70° (Front and Rear), 50° (Left and Right)
Backward: 60° (Horizontal), ±27° (Vertical)
Downward: 70° (Front and Rear), 50° (Left and Right)
Measuring FrequencyForward: 10 Hz
Backward: 10 Hz
Downward: 20 Hz
Backward: 10 Hz
Downward: 20 Hz
Operating EnvironmentSurface with clear pattern and adequate lighting (lux>15)
Infrared Sensing System
Obstacle Sensory Range0.6-23 feet (0.2-7 m)
FOV70° (Horizontal), ±10° (Vertical)
Measuring Frequency10 Hz
Operating EnvironmentSurface with diffuse reflection material, and reflectivity > 8% (such as wall, trees, humans, etc.)
Camera
Sensor1-inch CMOS
Effective pixels: 20M
Effective pixels: 20M
LensFOV 84° 8.8 mm/24 mm (35 mm format equivalent) f/2.8-f/11 auto focus at 1 m-∞
ISO RangeVideo:
100-3200 (Auto)
100-6400 (Manual)
Photo:
100-3200 (Auto)
100-12800 (Manual)
100-3200 (Auto)
100-6400 (Manual)
Photo:
100-3200 (Auto)
100-12800 (Manual)
Mechanical Shutter Speed8-1/2000 s
Electronic Shutter Speed8-1/8000 s
Image Size3:2 Aspect Ratio: 5472×3648
4:3 Aspect Ratio: 4864×3648
16:9 Aspect Ratio: 5472×3078
4:3 Aspect Ratio: 4864×3648
16:9 Aspect Ratio: 5472×3078
PIV Image Size4096×2160 (4096×2160 24/25/30/48/50p)
3840×2160 (3840×2160 24/25/30/48/50/60p)
2720×1530 (2720×1530 24/25/30/48/50/60p)
1920×1080 (1920×1080 24/25/30/48/50/60/120p)
1280×720 (1280×720 24/25/30/48/50/60/120p)
3840×2160 (3840×2160 24/25/30/48/50/60p)
2720×1530 (2720×1530 24/25/30/48/50/60p)
1920×1080 (1920×1080 24/25/30/48/50/60/120p)
1280×720 (1280×720 24/25/30/48/50/60/120p)
Still Photography ModesSingle Shot
Burst Shooting: 3/5/7/10/14 frames
Auto Exposure Bracketing (AEB): 3/5 bracketed frames at 0.7 EV Bias
Interval: 2/3/5/7/10/15/20/30/60 s
Burst Shooting: 3/5/7/10/14 frames
Auto Exposure Bracketing (AEB): 3/5 bracketed frames at 0.7 EV Bias
Interval: 2/3/5/7/10/15/20/30/60 s
Video Recording ModesH.265
C4K: 4096×2160 24/25/30p @100Mbps
4K: 3840×2160 24/25/30p @100Mbps
2.7K:2720×1530 24/25/30p @65Mbps
2.7K: 2720×1530 48/50/60p @80Mbps
FHD: 1920×1080 24/25/30p @50Mbps
FHD: 1920×1080 48/50/60p @65Mbps
FHD: 1920×1080 120p @100Mbps
HD:1280×720 24/25/30p @25Mbps
HD: 1280×720 48/50/60p @35Mbps
HD: 1280×720 120p @60Mbps
H.264
C4K: 4096×2160 24/25/30/48/50/60p @100Mbps
4K: 3840×2160 24/25/30/48/50/60p @100Mbps
2.7K: 2720×1530 24/25/30p @80Mbps
2.7K: 2720×1530 48/50/60p @100Mbps
FHD: 1920×1080 24/25/30p @60Mbps
FHD: 1920×1080 48/50/60 @80Mbps
FHD: 1920×1080 120p @100Mbps
HD: 1280×720 24/25/30p @30Mbps
HD: 1280×720 48/50/60p @45Mbps
HD: 1280×720 120p @80Mbps
C4K: 4096×2160 24/25/30p @100Mbps
4K: 3840×2160 24/25/30p @100Mbps
2.7K:2720×1530 24/25/30p @65Mbps
2.7K: 2720×1530 48/50/60p @80Mbps
FHD: 1920×1080 24/25/30p @50Mbps
FHD: 1920×1080 48/50/60p @65Mbps
FHD: 1920×1080 120p @100Mbps
HD:1280×720 24/25/30p @25Mbps
HD: 1280×720 48/50/60p @35Mbps
HD: 1280×720 120p @60Mbps
H.264
C4K: 4096×2160 24/25/30/48/50/60p @100Mbps
4K: 3840×2160 24/25/30/48/50/60p @100Mbps
2.7K: 2720×1530 24/25/30p @80Mbps
2.7K: 2720×1530 48/50/60p @100Mbps
FHD: 1920×1080 24/25/30p @60Mbps
FHD: 1920×1080 48/50/60 @80Mbps
FHD: 1920×1080 120p @100Mbps
HD: 1280×720 24/25/30p @30Mbps
HD: 1280×720 48/50/60p @45Mbps
HD: 1280×720 120p @80Mbps
Max Video Bitrate100 Mbps
Supported File SystemsFAT32 (≤32 GB); exFAT (>32 GB)
PhotoJPEG, DNG (RAW), JPEG + DNG
VideoMP4/MOV (AVC/H.264; HEVC/H.265)
Supported SD CardsmicroSD
Max Capacity: 128 GB
Write speed ≥15MB/s, Class 10 or UHS-1 rating required
Max Capacity: 128 GB
Write speed ≥15MB/s, Class 10 or UHS-1 rating required
Operating Temperature Range32° to 104°F (0° to 40°C)
Remote Controller
Operating Frequency2.400-2.483 GHz and 5.725-5.850 GHz
Max Transmission Distance2.400-2.483 GHz, 5.725-5.850 GHz (Unobstructed, free of interference)
FCC: 10000 m
CE: 6000 m
SRRC: 6000 m
MIC: 6000 m
FCC: 10000 m
CE: 6000 m
SRRC: 6000 m
MIC: 6000 m
Operating Temperature Range32° to 104°F (0° to 40°C)
Battery6000 mAh LiPo 2S
Transmitter Power (EIRP)2.400-2.483 GHz
FCC: 26 dBm
CE: 20 dBm
SRRC: 20 dBm
MIC: 17 dBm
5.725-5.850 GHz
FCC: 26 dBm
CE: 14 dBm
SRRC: 20 dBm
MIC: -
FCC: 26 dBm
CE: 20 dBm
SRRC: 20 dBm
MIC: 17 dBm
5.725-5.850 GHz
FCC: 26 dBm
CE: 14 dBm
SRRC: 20 dBm
MIC: -
Operating Current/Voltage1.2 A@7.4 V
Video Output PortGL300K: HDMI
GL300L: USB
GL300L: USB
Mobile Device HolderGL300K: Built-in display device (5.5-inch screen, 1920×1080, 1000 cd/m2, Android system, 4 GB RAM＋16 GB ROM)
GL300L: Tablets and smart phones
GL300L: Tablets and smart phones
Charger
Voltage17.4 V
Rated Power100 W
Intelligent Flight Battery
Capacity5870 mAh
Voltage15.2 V
Battery TypeLiPo 4S
Energy89.2 Wh
Net Weight468 g
Charging Temperature Range41° to 104°F (5° to 40°C)
Max Charging Power160 W
App / Live View
Mobile AppDJI GO 4
Live View Working Frequency2.4 GHz ISM, 5.8 GHz ISM
Live View Quality720P @ 30fps, 1080P @ 30fps
LatencyPhantom 4 Pro V2.0: 220 ms (depending on conditions and mobile device)
Phantom 4 Pro+ V2.0: 160-180 ms
Phantom 4 Pro+ V2.0: 160-180 ms
Notes
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
FAQ
Aircraft
1.How can I tell the Phantom 4 Pro V2.0 and Phantom 4 Pro apart?
The color of the DJI logo on the top of the Phantom 4 Pro is silver while that of the Phantom 4 Pro V2.0 is gold.
2.Are the ESCs used in the Phantom 4 Pro V2.0 the same as those in the Phantom 4 Pro?
No. The Phantom 4 Pro V2.0 uses FOC ESC drivers, which reduces the noise of the drone.
3.What are the propellers used with the Phantom 4 Pro V2.0?
9455S quick-release propellers.
4. What are the propellers for the Phantom 4 Pro V2.0 designed for?
This propeller model is designed to enhance aerodynamic efficiency and noise reduction.
5. Can the propellers for the Phantom 4 Pro V2.0 be used with the Phantom 4 Pro?
Yes.
6. Will the Phantom 4 Pro V2.0’s propellers deliver a noise reduction when being used with the Phantom 4 Pro?
Yes.
Gimbal and Camera
1.What are the specifications of the Phantom 4 Pro V2.0’s camera?
The Phantom 4 Pro V2.0’s camera is the same as the Phantom 4 Pro’s. It is equipped with a 1-inch 20-megapixel sensor,supporting shooting 4096x2160 videos at 60 fps (H.264) or 30 fps (H.265) with a maximum bitrate of 100 Mbps. It also has a manually adjustable aperture from F2.8 to F11. Auto, M, A (aperture priority), and S (shutter priority) modes are available. For more details, please refer to the Specifications on the product page on DJI’s official website.
2. Is the ND filter for the Phantom 4 Pro’s camera compatible with the Phantom 4 Pro V2.0?
Yes.
3. Why can’t the gimbal point forward horizontally when I’m flying in S-mode?
In S-mode, the aircraft can tilt up to 42 degrees, while the gimbal can move at most 45 degrees upward and 120 degrees downward. Hence, the gimbal cannot point forward horizontally when the aircraft is flying quickly in S-mode. To solve such issue, move the pitch of the gimbal downward by at least 12 degrees when flying in S-mode.
4. What is the maximum video bitrate of the Phantom Pro V2.0?
100 Mbps.
Remote Controller
1. What are the differences between the Phantom 4 Pro V2.0 and Phantom 4 Pro+ V2.0 ?
Their remote controllers are different.
The Phantom 4 Pro+ V2.0’s remote controller includes a 5.5-inch, 1080p, 1000 nit built-in display. Its screen can be seen clearly in direct sunlight. It can be used in low-temperature environments, and a mobile device is no longer required. The remote controller also features an HDMI port, a micro-SD card slot, a built-in microphone, and a speaker, which allows for live streaming and video editing anytime, anywhere.
The Phantom 4 Pro+ V2.0’s remote controller includes a 5.5-inch, 1080p, 1000 nit built-in display. Its screen can be seen clearly in direct sunlight. It can be used in low-temperature environments, and a mobile device is no longer required. The remote controller also features an HDMI port, a micro-SD card slot, a built-in microphone, and a speaker, which allows for live streaming and video editing anytime, anywhere.
2. Is the Phantom 4 Pro V2.0’s remote controller interchangeable with the Phantom 4 Pro’s?
No, as their image transmission technologies are different.
3. How can I tell the Phantom 4 Pro V2.0’s remote controller and Phantom 4 Pro’s apart?
A. The color of the DJI logo on the top of the Phantom 4 Pro’s remote controller is silver, while that of the Phantom 4 Pro V2.0 is gold.
B. Heat dissipation holes are added to the bottom of the Phantom 4 Pro V2.0’s remote controller.
B. Heat dissipation holes are added to the bottom of the Phantom 4 Pro V2.0’s remote controller.
4. What change does the Phantom 4 Pro V2.0’s remote controller have?
The Phantom 4 Pro V2.0’s remote controller uses a new OcuSync transmission technology, which allows a wireless connection to DJI Goggles RE.
5. Can I mount an external HDMI module to the Phantom 4 Pro V2.0’s remote controller?
No.
6. Can I switch my remote controller between FCC and CE?
Users cannot switch between FCC and CE manually. The remote controller will enable FCC or CE mode based on your location in accordance with local laws and regulations.
7. How can I link my remote controller to the Phantom 4 Pro V2.0?
A.Using DJI GO 4: Tap “Link Remote Controller” under Remote Controller Settings. The remote controller’s Status LED will blink blue, and you will hear a “DDD…” alarm. Then press the drone’s Link Button with a proper tool to link your remote controller to the Phantom 4 Pro V2.0.
B.Using a Button Combination: Press the C1, C2 and video recording buttons at the same time. After the remote controller’s Status LED blinks blue, and you hear a “DDD…” alarm, press the drone’s Link Button with a proper tool to link your remote controller to the Phantom 4 Pro V2.0.
B.Using a Button Combination: Press the C1, C2 and video recording buttons at the same time. After the remote controller’s Status LED blinks blue, and you hear a “DDD…” alarm, press the drone’s Link Button with a proper tool to link your remote controller to the Phantom 4 Pro V2.0.
Video Downlink
1. What video downlink technology does the Phantom 4 Pro V2.0 use?
The Phantom 4 Pro V2.0 is powered by a new OcuSync transmission system, and it supports 2.4 GHz and 5.8 GHz frequency bands.
2. What is the effective transmission distance of the Phantom 4 Pro V2.0’s remote controller?
FCC: 10 km, CE: 6 km (Unobstructed, free of interference).
Actual transmission distance varies depending environmental conditions and operation.(2.4GHz)
Actual transmission distance varies depending environmental conditions and operation.(2.4GHz)
3. What is the resolution of the Phantom 4 Pro V2.0’s video downlink?
Smooth Mode: 720p 60 fps
Normal Mode: 720p 30 fps
HD Mode: 1080p 30 fps
It can be set under the Image Transmission Settings in DJI GO 4.
Normal Mode: 720p 30 fps
HD Mode: 1080p 30 fps
It can be set under the Image Transmission Settings in DJI GO 4.
4.What should I do when DJI GO 4 displays a “Weak Remote Controller Signal. Adjust antenna.” warning?
The remote controller’s signal will be affected if its antennas are not positioned properly. Try to adjust the antennas.
Battery
1.What are the specifications of the Phantom 4 Pro V2.0’s Intelligent Flight Battery?
5870 mAh, 15.2 V, 89.8 Wh.
2. How long does it take to fully charge the Phantom 4 Pro V2.0’s Intelligent Flight Battery?
Around 90 minutes.
3.What can I do to protect my Phantom 4 Pro V2.0’s battery?
Keep the Intelligent Flight Battery away from water or moisture. Battery level should fall between 45% and 65% when the Intelligent Flight Battery is to be stored for a long period. If the Intelligent Flight Battery is to be stored for more than three months, it should be fully charged and discharged once every three months to avoid over-discharging.
4.Is it normal that the visual representation of the battery cells is yellow under the Aircraft Battery screen in DJI GO 4?
Yes, when the voltage of the battery cells is lower than 3.62 V, the display will turn yellow.
5.How should I use the Intelligent Flight Battery in a low-temperature environment?
Battery capacity will decrease significantly when the Intelligent Flight Battery is used at low temperatures (below minus 10 degree Celsius). It is recommended to warm up the Intelligent Flight Battery to 20 degrees Celsius before a flight.
6.Why will the Phantom 4 Pro V2.0’s battery emit heat when it has been stored for a long period?
When the battery has been stored for a long period with over 65% charge, the auto-discharging function will be triggered. The Intelligent Flight Battery will discharge to 65% of its total power automatically while emitting moderate heat.
Software
1. Can I use the same method to update the Phantom 4 Pro V2.0’s firmware as the Phantom 4 Pro’s?
The Phantom 4 Pro V2.0’s firmware can be updated with both DJI GO 4 and DJI Assistant 2. But the update methods differ.
If updating with DJI GO 4, the mobile device and drone do not need to be connected to the USB OTG cable and micro USB cable anymore. Instead, the remote controller’s firmware and aircraft’s firmware can be updated in the app at the same time.
When updating with DJI Assistant 2, you can choose to update the remote controller’s firmware or aircraft’s firmware separately or update both of them at the same time.
If updating with DJI GO 4, the mobile device and drone do not need to be connected to the USB OTG cable and micro USB cable anymore. Instead, the remote controller’s firmware and aircraft’s firmware can be updated in the app at the same time.
When updating with DJI Assistant 2, you can choose to update the remote controller’s firmware or aircraft’s firmware separately or update both of them at the same time.
2. In which conditions will the left, and right infrared sensors work?
The left and right infrared sensors will only function in Beginner Mode and Tripod Mode.
3. What mobile devices are compatible with DJI GO 4?
DJI GO 4 can run on both iOS and Android mobile devices. For more details, please see the Specifications on the product page on DJI’s official website.
4. What is the sensing range of the left and right infrared sensors?
0.2 meters to 7 meters.
5. Is the Return to Home (RTH) logic of the Phantom 4 Pro V2.0 the same as the Phantom 4 Pro?
Yes.
Search for More Information
Contact Us
DJI Community
Connect with DJI enthusiasts to explore various product experiences
Join DJI Community